Bitcoin Hack GENERATES 10 BTC ! 100% WORKING - BTCPeek Methods

Syscoin Platform’s Great Reddit Scaling Bake-off Proposal

Syscoin Platform’s Great Reddit Scaling Bake-off Proposal

https://preview.redd.it/rqt2dldyg8e51.jpg?width=1044&format=pjpg&auto=webp&s=777ae9d4fbbb54c3540682b72700fc4ba3de0a44
We are excited to participate and present Syscoin Platform's ideal characteristics and capabilities towards a well-rounded Reddit Community Points solution!
Our scaling solution for Reddit Community Points involves 2-way peg interoperability with Ethereum. This will provide a scalable token layer built specifically for speed and high volumes of simple value transfers at a very low cost, while providing sovereign ownership and onchain finality.
Token transfers scale by taking advantage of a globally sorting mempool that provides for probabilistically secure assumptions of “as good as settled”. The opportunity here for token receivers is to have an app-layer interactivity on the speed/security tradeoff (99.9999% assurance within 10 seconds). We call this Z-DAG, and it achieves high-throughput across a mesh network topology presently composed of about 2,000 geographically dispersed full-nodes. Similar to Bitcoin, however, these nodes are incentivized to run full-nodes for the benefit of network security, through a bonded validator scheme. These nodes do not participate in the consensus of transactions or block validation any differently than other nodes and therefore do not degrade the security model of Bitcoin’s validate first then trust, across every node. Each token transfer settles on-chain. The protocol follows Bitcoin core policies so it has adequate code coverage and protocol hardening to be qualified as production quality software. It shares a significant portion of Bitcoin’s own hashpower through merged-mining.
This platform as a whole can serve token microtransactions, larger settlements, and store-of-value in an ideal fashion, providing probabilistic scalability whilst remaining decentralized according to Bitcoin design. It is accessible to ERC-20 via a permissionless and trust-minimized bridge that works in both directions. The bridge and token platform are currently available on the Syscoin mainnet. This has been gaining recent attention for use by loyalty point programs and stablecoins such as Binance USD.

Solutions

Syscoin Foundation identified a few paths for Reddit to leverage this infrastructure, each with trade-offs. The first provides the most cost-savings and scaling benefits at some sacrifice of token autonomy. The second offers more preservation of autonomy with a more narrow scope of cost savings than the first option, but savings even so. The third introduces more complexity than the previous two yet provides the most overall benefits. We consider the third as most viable as it enables Reddit to benefit even while retaining existing smart contract functionality. We will focus on the third option, and include the first two for good measure.
  1. Distribution, burns and user-to-user transfers of Reddit Points are entirely carried out on the Syscoin network. This full-on approach to utilizing the Syscoin network provides the most scalability and transaction cost benefits of these scenarios. The tradeoff here is distribution and subscription handling likely migrating away from smart contracts into the application layer.
  2. The Reddit Community Points ecosystem can continue to use existing smart contracts as they are used today on the Ethereum mainchain. Users migrate a portion of their tokens to Syscoin, the scaling network, to gain much lower fees, scalability, and a proven base layer, without sacrificing sovereign ownership. They would use Syscoin for user-to-user transfers. Tips redeemable in ten seconds or less, a high-throughput relay network, and onchain settlement at a block target of 60 seconds.
  3. Integration between Matic Network and Syscoin Platform - similar to Syscoin’s current integration with Ethereum - will provide Reddit Community Points with EVM scalability (including the Memberships ERC777 operator) on the Matic side, and performant simple value transfers, robust decentralized security, and sovereign store-of-value on the Syscoin side. It’s “the best of both worlds”. The trade-off is more complex interoperability.

Syscoin + Matic Integration

Matic and Blockchain Foundry Inc, the public company formed by the founders of Syscoin, recently entered a partnership for joint research and business development initiatives. This is ideal for all parties as Matic Network and Syscoin Platform provide complementary utility. Syscoin offers characteristics for sovereign ownership and security based on Bitcoin’s time-tested model, and shares a significant portion of Bitcoin’s own hashpower. Syscoin’s focus is on secure and scalable simple value transfers, trust-minimized interoperability, and opt-in regulatory compliance for tokenized assets rather than scalability for smart contract execution. On the other hand, Matic Network can provide scalable EVM for smart contract execution. Reddit Community Points can benefit from both.
Syscoin + Matic integration is actively being explored by both teams, as it is helpful to Reddit, Ethereum, and the industry as a whole.

Proving Performance & Cost Savings

Our POC focuses on 100,000 on-chain settlements of token transfers on the Syscoin Core blockchain. Transfers and burns perform equally with Syscoin. For POCs related to smart contracts (subscriptions, etc), refer to the Matic Network proposal.
On-chain settlement of 100k transactions was accomplished within roughly twelve minutes, well-exceeding Reddit’s expectation of five days. This was performed using six full-nodes operating on compute-optimized AWS c4.2xlarge instances which were geographically distributed (Virginia, London, Sao Paulo Brazil, Oregon, Singapore, Germany). A higher quantity of settlements could be reached within the same time-frame with more broadcasting nodes involved, or using hosts with more resources for faster execution of the process.
Addresses used: 100,014
The demonstration was executed using this tool. The results can be seen in the following blocks:
612722: https://sys1.bcfn.ca/block/6d47796d043bb4c508d29123e6ae81b051f5e0aaef849f253c8f3a6942a022ce
612723: https://sys1.bcfn.ca/block/8e2077f743461b90f80b4bef502f564933a8e04de97972901f3d65cfadcf1faf
612724: https://sys1.bcfn.ca/block/205436d25b1b499fce44c29567c5c807beaca915b83cc9f3c35b0d76dbb11f6e
612725: https://sys1.bcfn.ca/block/776d1b1a0f90f655a6bbdf559ff5072459cbdc5682d7615ff4b78c00babdc237
612726: https://sys1.bcfn.ca/block/de4df0994253742a1ac8ac9eec8d2a8c8b0a6d72c53d6f3caa29bb6c171b0a6b
612727: https://sys1.bcfn.ca/block/e5e167c52a9decb313fbaadf49a5e34cb490f8084f642a850385476d4ef10d70
612728: https://sys1.bcfn.ca/block/ab64d989edc71890e7b5b8491c20e9a27520dc45a5f7c776d3dae79057f59fe7
612729: https://sys1.bcfn.ca/block/5e8b7ecd0e36f99d07e4ea6e135fc952bf7ec30164ab6f4d1e98b0f2d405df6d
612730: https://sys1.bcfn.ca/block/d395df3d31dde60bbb0bece6bd5b358297da878f0beb96be389e5f0e043580a3
It is important to note that this POC is not focused on Z-DAG. The performance of Z-DAG has been benchmarked within realistic network conditions: Whiteblock’s audit is publicly available. Network latency tests showed an average TPS around 15k with burst capacity up to 61k. Zero-latency control group exhibited ~150k TPS. Mainnet testing of the Z-DAG network is achievable and will require further coordination and additional resources.
Even further optimizations are expected in the upcoming Syscoin Core release which will implement a UTXO model for our token layer bringing further efficiency as well as open the door to additional scaling technology currently under research by our team and academic partners. At present our token layer is account-based, similar to Ethereum. Opt-in compliance structures will also be introduced soon which will offer some positive performance characteristics as well. It makes the most sense to implement these optimizations before performing another benchmark for Z-DAG, especially on the mainnet considering the resources required to stress-test this network.

Cost Savings

Total cost for these 100k transactions: $0.63 USD
See the live fee comparison for savings estimation between transactions on Ethereum and Syscoin. Below is a snapshot at time of writing:
ETH price: $318.55 ETH gas price: 55.00 Gwei ($0.37)
Syscoin price: $0.11
Snapshot of live fee comparison chart
Z-DAG provides a more efficient fee-market. A typical Z-DAG transaction costs 0.0000582 SYS. Tokens can be safely redeemed/re-spent within seconds or allowed to settle on-chain beforehand. The costs should remain about this low for microtransactions.
Syscoin will achieve further reduction of fees and even greater scalability with offchain payment channels for assets, with Z-DAG as a resilience fallback. New payment channel technology is one of the topics under research by the Syscoin development team with our academic partners at TU Delft. In line with the calculation in the Lightning Networks white paper, payment channels using assets with Syscoin Core will bring theoretical capacity for each person on Earth (7.8 billion) to have five on-chain transactions per year, per person, without requiring anyone to enter a fee market (aka “wait for a block”). This exceeds the minimum LN expectation of two transactions per person, per year; one to exist on-chain and one to settle aggregated value.

Tools, Infrastructure & Documentation

Syscoin Bridge

Mainnet Demonstration of Syscoin Bridge with the Basic Attention Token ERC-20
A two-way blockchain interoperability system that uses Simple Payment Verification to enable:
  • Any Standard ERC-20 token to be moved from Ethereum to the Syscoin blockchain as a Syscoin Platform Token (SPT), and back to Ethereum
  • Any SPT to be moved from Syscoin to the Ethereum blockchain as an ERC-20 token, and back to Syscoin

Benefits

  • Permissionless
  • No counterparties involved
  • No trading mechanisms involved
  • No third-party liquidity providers required
  • Cross-chain Fractional Supply - 2-way peg - Token supply maintained globally
  • ERC-20s gain vastly improved transactionality with the Syscoin Token Platform, along with the security of bitcoin-core-compliant PoW.
  • SPTs gain access to all the tooling, applications and capabilities of Ethereum for ERC-20, including smart contracts.
https://preview.redd.it/l8t2m8ldh8e51.png?width=1180&format=png&auto=webp&s=b0a955a0181746dc79aff718bd0bf607d3c3aa23
https://preview.redd.it/26htnxzfh8e51.png?width=1180&format=png&auto=webp&s=d0383d3c2ee836c9f60b57eca35542e9545f741d

Source code

https://github.com/syscoin/?q=sysethereum
Main Subprojects

API

Tools to simplify using Syscoin Bridge as a service with dapps and wallets will be released some time after implementation of Syscoin Core 4.2. These will be based upon the same processes which are automated in the current live Sysethereum Dapp that is functioning with the Syscoin mainnet.

Documentation

Syscoin Bridge & How it Works (description and process flow)
Superblock Validation Battles
HOWTO: Provision the Bridge for your ERC-20
HOWTO: Setup an Agent
Developer & User Diligence

Trade-off

The Syscoin Ethereum Bridge is secured by Agent nodes participating in a decentralized and incentivized model that involves roles of Superblock challengers and submitters. This model is open to participation. The benefits here are trust-minimization, permissionless-ness, and potentially less legal/regulatory red-tape than interop mechanisms that involve liquidity providers and/or trading mechanisms.
The trade-off is that due to the decentralized nature there are cross-chain settlement times of one hour to cross from Ethereum to Syscoin, and three hours to cross from Syscoin to Ethereum. We are exploring ways to reduce this time while maintaining decentralization via zkp. Even so, an “instant bridge” experience could be provided by means of a third-party liquidity mechanism. That option exists but is not required for bridge functionality today. Typically bridges are used with batch value, not with high frequencies of smaller values, and generally it is advantageous to keep some value on both chains for maximum availability of utility. Even so, the cross-chain settlement time is good to mention here.

Cost

Ethereum -> Syscoin: Matic or Ethereum transaction fee for bridge contract interaction, negligible Syscoin transaction fee for minting tokens
Syscoin -> Ethereum: Negligible Syscoin transaction fee for burning tokens, 0.01% transaction fee paid to Bridge Agent in the form of the ERC-20, Matic or Ethereum transaction fee for contract interaction.

Z-DAG

Zero-Confirmation Directed Acyclic Graph is an instant settlement protocol that is used as a complementary system to proof-of-work (PoW) in the confirmation of Syscoin service transactions. In essence, a Z-DAG is simply a directed acyclic graph (DAG) where validating nodes verify the sequential ordering of transactions that are received in their memory pools. Z-DAG is used by the validating nodes across the network to ensure that there is absolute consensus on the ordering of transactions and no balances are overflowed (no double-spends).

Benefits

  • Unique fee-market that is more efficient for microtransaction redemption and settlement
  • Uses decentralized means to enable tokens with value transfer scalability that is comparable or exceeds that of credit card networks
  • Provides high throughput and secure fulfillment even if blocks are full
  • Probabilistic and interactive
  • 99.9999% security assurance within 10 seconds
  • Can serve payment channels as a resilience fallback that is faster and lower-cost than falling-back directly to a blockchain
  • Each Z-DAG transaction also settles onchain through Syscoin Core at 60-second block target using SHA-256 Proof of Work consensus
https://preview.redd.it/pgbx84jih8e51.png?width=1614&format=png&auto=webp&s=5f631d42a33dc698365eb8dd184b6d442def6640

Source code

https://github.com/syscoin/syscoin

API

Syscoin-js provides tooling for all Syscoin Core RPCs including interactivity with Z-DAG.

Documentation

Z-DAG White Paper
Useful read: An in-depth Z-DAG discussion between Syscoin Core developer Jag Sidhu and Brave Software Research Engineer Gonçalo Pestana

Trade-off

Z-DAG enables the ideal speed/security tradeoff to be determined per use-case in the application layer. It minimizes the sacrifice required to accept and redeem fast transfers/payments while providing more-than-ample security for microtransactions. This is supported on the premise that a Reddit user receiving points does need security yet generally doesn’t want nor need to wait for the same level of security as a nation-state settling an international trade debt. In any case, each Z-DAG transaction settles onchain at a block target of 60 seconds.

Syscoin Specs

Syscoin 3.0 White Paper
(4.0 white paper is pending. For improved scalability and less blockchain bloat, some features of v3 no longer exist in current v4: Specifically Marketplace Offers, Aliases, Escrow, Certificates, Pruning, Encrypted Messaging)
  • 16MB block bandwidth per minute assuming segwit witness carrying transactions, and transactions ~200 bytes on average
  • SHA256 merge mined with Bitcoin
  • UTXO asset layer, with base Syscoin layer sharing identical security policies as Bitcoin Core
  • Z-DAG on asset layer, bridge to Ethereum on asset layer
  • On-chain scaling with prospect of enabling enterprise grade reliable trustless payment processing with on/offchain hybrid solution
  • Focus only on Simple Value Transfers. MVP of blockchain consensus footprint is balances and ownership of them. Everything else can reduce data availability in exchange for scale (Ethereum 2.0 model). We leave that to other designs, we focus on transfers.
  • Future integrations of MAST/Taproot to get more complex value transfers without trading off trustlessness or decentralization.
  • Zero-knowledge Proofs are a cryptographic new frontier. We are dabbling here to generalize the concept of bridging and also verify the state of a chain efficiently. We also apply it in our Digital Identity projects at Blockchain Foundry (a publicly traded company which develops Syscoin softwares for clients). We are also looking to integrate privacy preserving payment channels for off-chain payments through zkSNARK hub & spoke design which does not suffer from the HTLC attack vectors evident on LN. Much of the issues plaguing Lightning Network can be resolved using a zkSNARK design whilst also providing the ability to do a multi-asset payment channel system. Currently we found a showstopper attack (American Call Option) on LN if we were to use multiple-assets. This would not exist in a system such as this.

Wallets

Web3 and mobile wallets are under active development by Blockchain Foundry Inc as WebAssembly applications and expected for release not long after mainnet deployment of Syscoin Core 4.2. Both of these will be multi-coin wallets that support Syscoin, SPTs, Ethereum, and ERC-20 tokens. The Web3 wallet will provide functionality similar to Metamask.
Syscoin Platform and tokens are already integrated with Blockbook. Custom hardware wallet support currently exists via ElectrumSys. First-class HW wallet integration through apps such as Ledger Live will exist after 4.2.
Current supported wallets
Syscoin Spark Desktop
Syscoin-Qt

Explorers

Mainnet: https://sys1.bcfn.ca (Blockbook)
Testnet: https://explorer-testnet.blockchainfoundry.co

Thank you for close consideration of our proposal. We look forward to feedback, and to working with the Reddit community to implement an ideal solution using Syscoin Platform!

submitted by sidhujag to ethereum [link] [comments]

Logs of yesterday's dev meeting

 Dev meeting?  Would say so, yes  The people are still exhausted from the payment ID meeting :)  Guess we could ping some people  vtnerd, moneromooo, hyc, gingeropolous, TheCharlatan, sarang, suraeNoether, jtgrassie  Anyone up for a meeting?  Yep I'm here  Here  o/  Perhaps we should just start and people will eventually hop in?   oof   sorry guys, I'm working on the new FFS and I forgot all about this. Got a couple of new volunteers.   This literally might be able to launch tomorrow.  I know that. It's called "flow" :)  I could run if you're out of time?   go for it dEBRUYNE   you guys are going to like this new FFS. We're like 99% done.  Hi  rehrar: someone else do the milestone thing already?  All right, jtgrassie, perhaps you'd to start w/ briefly describing your most recent PR? https://github.com/monero-project/monero/pull/5091   oneiric, xiphon did everything   like....everything  As far as I can see, it allows the user to push his transaction over I2P, thereby masking the origin IP of the sendeuser  great  And it hooks into vtnerd's PR right?  Sure. It basically just builds on vtnerds Tor stuff.  sorry dEBRUYNE  Really not much added.  I have it running and tested.  From the perspective of the user, what needs to be configured exactly?  Nice  Assuming the PR is included in the release binaries  I'm using knacccs i2p-zero duirng testing but will of course work with any i2p setup   sorry dEBRUYNE <= Np  Looks a little like dams breaking, now that we have some dark clouds over Kovri and people take matters into their own hands ...  User needs to run i2p, expose a socks service and and inbound tunnel.  Basically same as Tor  Okay, so should be reasonable as long as we write proper documentation for it (e.g. an elaborate guide)  rbrunner, yes, knaccc credit for jumping on i2p-zero really  dEBRUYNE: documentation monero side is kindof done. i2p side is very much implementation specific.  I suppose we could write some guides for the most popular implementations?  e.g. i2p-zero aims to be zero conf, but i2pd or Kovri would be differnet.  I see, great  vtnerd___: Do you want to add anything?  could amend the current kovri guide for monero use from --exclusive-peer to the new proxy support  Now I have i2p-zero running and tested with the #5091, I plan to jump back over to helping knaccc on getting that polished.  I added support for socks proxy in the basic wallets  ^ excellent  Yes vtnerd___ I havent tested it yet but looks sweet.  So connections to `monerod` over Toi2p are possible within wallet cli and wallet rpc  Awesome  This also implies auth+encryption even if ssl is not in use (when using an onion or i2p address)  All right  moneromooo: are you here? If so, could you perhaps share what you've been working on?  I am.  I revived the SSL PR, more stuff on multi sender txes, an implementation of ArticMine's new block size algorithm.  I presume a multi sender tx works similar to multisig insofar as the senders have to exchange data before the transaction can be performed right?  Yes.  There are 2 SSL PRs. What's the diff?  Theoretically this would also allow the sender to provide an output right? Which would be kind of similar to Bitcoin's P2EP  The second one adds some things like selecting a cert by fingerprint.  Yes.  (for the first sentence)  All right, awesome  For anyone reading, this breaks the assumption of the inputs belonging to a single sender, which makes analysis more difficult  Nice side-effect.  Much work coming for the various wallets to support that  rbrunner: Anything you'd like to share in the meeting btw?  Yes, just a little info  I have started to seriously investigate what it would mean to integrate Monero into OpenBazaar  I have already talked with 2 of their devs, was very interesting  In maybe 2 or 3 weeks I intend to write a report  Too early to tell much more :)  Soon^tm I guess :)  Yep  Currently wrestling with Go debugging  whole new world  moneromooo: Has pony recently shared any insights regarding the upcoming 0.14 release btw?  No.  All right  I would love to see the tor & i2p PR's merged sooner rather than later so we can get more testing done.  ^ +1  Isn't that famous early code freeze already on the horizon?  fluffypony, luigi1111 ^  I suppose I could provide a little update regarding the GUI btw  As always, lots of bug fixes and improvements :-P  selsta has recently added a feature to support multi accounts  dsc_ has revamped the wizard and will now start working on implementing the different modes and a white theme  dsc_ is working fulltime on the GUI already?  yes  :)   dsc_ is bae  In light of the recent payment ID discussion, we've also, by default, disabled the option to add a payment ID unless the user explicitely activates the option on the settings page  rehrar ^  nice   I spoke about this yesterday at the coffee chat, this is not a good decision.  How does it handle integrated addresses? The same way?  rehrar ?   For the next many months, we are still stuck with PAyment IDs in the ecosystem. Making it harder for people to access them will make Monero suck so hard to use for the average person for many months.  i agree with rehrar   Remove the option of Payment IDs when we remove Payment IDs  rehrar: The new GUI release won't be live until probably mid march though  Which is a few weeks in advance of the scheduled protocol upgrade   Payment ID removal comes in October   right, but Payment IDs are not removed in March  Did we not have loose consensus on removing the old, unencrypted payment IDs in march?   they are removed in October  We had discussed a deprecation in March  and a ban in October   ok, then if we are going to do that, we have to commit to it and contact the exchanges like Binance that use them and get rid of them in the next few months  (of unencrypted)   Binance is huge, and if they still use them, then people will be very upset that they can't deposit or use Payment IDs easily   I'm just speaking from a UX perspective.  I thought it was unencrypted in April and possibly encrypted in October  Yes I do agree  Timeline and notes: https://github.com/monero-project/meta/issues/299  impossible to remove them for march, many exchanges still use them  We can defer it to the 0.15 release if needed  Well, that wasn't the impression for them log that I just read today  This was all discussed in the earlier meeting linked above   We have to force the ecosystem off of Payment IDs before we remove them from the UI, is all I'm saying  Remove != make difficult to use  ... or make them more difficult there, right?  ping sgp_   sarang, I understand, and I agreed with you during that meeting. But then I started thinking of it as a UX person, which I am.   And that huge massive problem leapt out at me  i think making them difficult to generate is a good idea but making them difficult to consume and use is a bad idea  well, maybe not a good idea, but a better idea   ^  If we defer the decision to depriciate long payment IDs to october, won't we have the same issue then?  The UI can gave an expandable payment ID field like MyMonero and we can still call it deprecated   It is foolhardy to remove an option that the ecosystem uses. So I suggest we keep the Payment ID in the UI until October when they are completely banned.   no dEBRYUNE, because they will be banned via consensus  sgp_ imo it may be a misdirection of dev resources to add that since things are proceeding in the short term rather than long term  but this is a relatively minor point  Nothing matters til exchanges change  All right   The issue is that consensus will still have them in April, and exchanges won't upgrade because they are still allowed. Thus they must still be in the UI.  endogenic these changes are already merged in the GUI to hide it like you do  ok   But when they are banned, exchanges are forced to upgrade or stop using Monero, so we can remove them safely because they won't be in use  rehrar: that's a strong assumption   sarang that they will upgrade?  yes   if they don't, then they can't use Monero  If exchanges require pid, users need a way to set a pid. Making it hard for the user in the interim is just going to be a nightmare.   we have decided to take our "stand" in October  A way that is not too hard, then  To be clear, we still intend to deprecate long encrypted payment IDs in April right? But no enforcement until October   the term "deprecated" doesn't mean much if it's still allowed, and used in popular places   yes, as far as I understand it   jtgrassie, exactly  True I suppose  dEBRUYNE: we need to be more specific when talking about deprecation   the person who suffers is the user  There are two proposals for GUI deprecation:  1. Hide it in the send screen with a simple option to expand (currently merged iirc)  2. Hide it completely in the send screen unless users enable the field in advanced settings (PR'd but not merged yet iirc)  What are the arguments for 2?   Both are poor options, but 1 is better than 2 by a long shot   Well the people who need to be made to "suffer" are the exchanges. And I don't see a way to make exchanges "suffer" other than by having their suffering customers complain to them constantly that they need to update.  ^  CLI has something similar where users need to set a manual payment ID transfer mode. Not sure if it's merged yet   the way to make the exchanges suffer is when we ban PIDs. They either upgrade or don't use Monero.  exact;y  Agree with rerahr here  have exchanges been provided with clear, practical, sufficient technical upgrade plans for supporting what they're doing with PIDs but with subaddrs?    Both are poor options, but 1 is better than 2 by a long shot <= I wouldn't call 1. a poor option. Have you actually checked how it looks?  Because it states "Payment ID" and a user has to click on the + to expand the field  endogenic: yes the email when out. Blog post coming soon, but contains the same info as the email  also the exhcnages' users are often using wallets that don't support subaddresses  ok great   as well, it should be noted that the timeline for exchanges to upgrade is September, not October when the fork is.  Which wallets are that?  Rehrar: I don't see option 1. causing any issues/confusion  i guess it doesnt matter too much if withdrawing as a personal user the main address should suffice   Because September is when the new versions will be coming out without PIDs in the UI  If there's opposition to 2, 1 is fine. We can still call it deprecated which is the optics we need anyway   exchange users are often just using other exchanges lol. No wallets involved.   dsc_ dEBRUYNE, ok, I trust you guys here then  rbrunner: i was thinking mymonero last i heard  Ok  pigeons: rbrunner yes receiving on subaddresses won't be supported yet  sending to them has been possible though  and yes as learnandlurkin says often they withdraw to other systems like exhcnages that also dont yet support subaddresses  I really can't come up with any good argument for 2. right now  endogenic: seems not much of an issue then. Exchanges will typically support withdrawals to both subaddresses and plain addresses (especially if we are going to force them to use subaddresses)  For deposits, MyMonero works properly if the user sends to a subaddress  Actually the second solution was already merged: https://github.com/monero-project/monero-gui/pull/1866  Maybe not enough eyes watching :)   The important thing is to have done something to justify having a big "DEPRECATED IN APRIL" stamp on PIDs to spook exchanges in the interim  This was for solution 1: https://github.com/monero-project/monero-gui/pull/1855   The Monero Community Workgroup will start making noise everywhere we can to exchanges, and everywhere else that will listen. Try to get on those garbage news sites also.   So everyone knows that deprecated in April, and banned in September  Hey, for solution 1, write "Payment ID (optional, deprecated)" or similar there  rbrunner: noted  rehrar: probably wait until the blog post, but it should only be a few days   Maybe a Reddit sticky post would be useful?   With the blog post   If people are over freaking out about the hashrate  or terabyte blockchain :)  sigh  Any questions for the MRL side?  Is someone checking ArticMine's block size changes for weird behaviour in some cases etc ?  How would such testing work? Private blockchain?  I'm waiting on cost information from ArticMine to complete the model  Or just simulations?  Also, smooth suggested a mean rather than median for the 100000 block op. It would indeed be much nicer if it doesn't make the change worse.  You mean computationally or what?  Nicer ? Yes.  no sorting needed for mean  I'll add a separate sim for that  Well, just nicer. Forger the much.  Forger the Much sounds like the formal name of a Lord of the Rings character  :)  To close the payment ID discussion, in essence, we agree that we shouldn't make it difficult for the user to add a payment ID right (until 0.15 is released)  ?  I don't. I did make it harder.  In the CLI, somewhat other story, I would say  than the GUI  People there are used to juggle with options and CL parameters  rehrar: I recommend opening another issue to reverse 1866 and we can gather feedback on it there  Sounds good, to me at least   Dudes, if I do a Jitsi stream right now to show the new FFS in action, would you guys be interested in watching it?  I'd watch it, if the meeting is formally done  sure  yeah, can I start one and record it?   I'll give it in like fifteen minutes   I'll let you all know, stand by  I have a question on tx_extra if no one else has anything to talk about  People have said you can put arbitrary data in there in whatever format you want as long as you're willing to pay for it. However, do you need to mine the transaction for it to be included? I didn't think nodes would block transactions with arbitrary tx_extra data  It'll be in nodes' txpool when you relay it. A wallet could see it before it's mined.  moneromooo: will it be mined though?  by others  Is it valid ?  assume it's otherwise valid  Does it have a high enough fee ?  assume it does yes  I ran into conflicting information here: https://monero.stackexchange.com/a/3627/42  Then it will probably be mined.  I once had the idea to put "my" MMS messages in there, looked at the code, and found no hard blocks for tx_extra data  That answer looks incorrect.  It is incorrect  If it will be mined, then that meets my assumption. There seems to be some misconception that people will not mine transactions with arbitrary tx_extra. I can add some comments there  And please don't spam it, and don't put fingerprintable stuff in it. It's meant to be here for *useful* stuff that's "uniform" enough.  It will be mined, whether a wallet *displays* the tx_extra is a different question.  I don't think any wallet currently displays that  it soes if its a pid  I think  Yeah, of course :)  Great, that answers my question 
submitted by dEBRUYNE_1 to Monero [link] [comments]

Groestlcoin September 2019 Development Release/Update!

For a more interactive view of changes, click here
In our current world; bordering on financial chaos, with tariff wars, Brexit and hyperinflation rife, you can count on Groestlcoin to consistently produce innovation that strikes to take the power away from the few and into the many, even after a full five and a half years of solid development.
Here is what the team has already announced in the last 3 months since the last development update:

What's Being Released Today?

Groestl Nodes

What am I?

Groestl Nodes aims to map out and compare the status of the Groestlcoin mainnet and testnet networks. Even though these networks share the same protocol, there is currently no way to directly compare these coins in a single location. These statistics are essential to evaluate the relative health of both networks.

Features

Source - Website

Groestlcoin Transaction Tool

What am I?

This is a tool for creating unsigned raw Groestlcoin transactions and also to verify existing transactions by entering in the transaction hex and converting this to a human-readable format to verify that a transaction is correct before it is signed.

Features

SourceDownload

Groestlcoin AGCore

What am I?

AGCore is an Android app designed to make it easier to run a Groestlcoin Core node on always-on Android appliances such as set-top boxes, Android TVs and repurposed tablets/phones. If you are a non-technical user of Groestlcoin and want an Android app that makes it easy to run a Groestlcoin Core node by acting as a wrapper, then AG Core is the right choice for you.

What's Changed?

Source - Download

Groestlcoin Electrum

What's Changed?

Android Electrum-Specific

OSXWindowsWindows StandaloneWindows PortableLinux - Android
Server SourceServer Installer SourceClient SourceIcon SourceLocale Source

Android Wallet – Including Android Wallet Testnet

What am I?

Android Wallet is a BIP-0032 compatible hierarchial deterministic Groestlcoin Wallet, allowing you to send and receive Groestlcoin via QR codes and URI links.

V7.11.1 Changes

Groestlcoin Java Library SourceSource - DownloadTestnet Download

Groestlwallet

What am I?

Groestlwallet is designed to protect you from malware, browser security holes, even physical theft. With AES hardware encryption, app sandboxing, keychain and code signatures, groestlwallet represents a significant security advance over web and desktop wallets, and other mobile platforms.
Simplicity is groestlwallet's core design principle. Because groestlwallet is "deterministic", your balance and entire transaction history can be restored from just your recovery phrase.

iOS 0.7.3 Changes

Android v89 Changes

iOS SourceAndroid Source - Android DownloadiOS Download

Groestlcoinomi Released

What am I?

Groestlcoinomi is a lightweight thin-client Groestlcoin wallet based on a client-server protocol.

Groestlcoinomi v1.1 Desktop Changes

Groestlcoinomi Android v1.6 Changes

Groestlcoin Java Library SourceAndroid Source
Android DownloadWindows DownloadMac OS DownloadLinux Download

Groestlcoin BIP39 Tool

What's Changed?

Source - Download
submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Backup Wallet.dat

"1) I can backup my wallet by exporting a wallet.dat file. Do I have to do this everytime I receive more BBP? Or just whenever I add a new key? 2) How do I add new keys? 3) Can I generate and see the private key so that I can write it down/print it and store it somewhere safe?" -znffal
1) think of your wallet.dat file as your passbook in a passbook savings account. You have to have that .dat file to be able to access (and prove you SHOULD have access) to the BBP stored in your account addresses. Exporting it once is all you need.
2) Adding new keys? The passphrase (password) you use is the only "key" you would have in an encrypted wallet (besides the .dat file). If you mean new addresses, you can get those by going under File and Sending (or Receving) Addresses and hit "new".
3) Clicking Encrypt Wallet will be where you choose a passphase, I don't know you can see it other than when you enter it.
To put a real world example or two.
Example One: You don't ever encrypt or backup your wallet. If I borrowed/stole/hacked your computer, I could send all your coins to my wallet (no passphrase).
Example Two: You encrypt your wallet with the passphrase "secret" but don't backup the wallet.dat file, then your computer crashes and you lose all your data. Since you didn't have a copy of the wallet.dat file, your coins would be lost.
Example Three: You backup your wallet.dat but don't encrypt it. Your computer crashes and all your data is lost, but you re-download the QT program, restore your wallet.dat, all your coins are still in you wallet. But if you lose your USB drive that has the wallet.dat on it, and I find it, I can put your wallet.dat on another computer and send all your coins to my wallet.
Example Four: You encrypt your wallet and back up the wallet.dat file. If I hack/borrow your computer, unless I guess your passphrase your coins are safe. If you computer crashes, your can restore your wallet.dat file to another computer and your coins are safe.
In short, Encrypt your wallet (passpharse) and then backup (copy) the wallet.dat file to at least two locations." -616westwarmoth
"Find your wallet.dat file, copy it to a flash drive or any other secure place. If your computer crashes, you'll always have the wallet.dat and can put it on a new machine. It will have to resync a bit when you do, but you'll never lose your "key" to the wallet. Speaking of keys, you should password protect your wallet and make sure to remember it!"
"Yes you must have a copy of the wallet.dat somewhere. So multiple back up copies are a good idea. If you lose the wallet.dat file the coins will be in limbo but there will be no way to recreate the file. One thing to remember is it doesn't matter if the wallet.dat file is "current", it can be 10 years old on a flash drive and you can download a new client, put the wallet.dat file into the machine and you'll be good." -616westwarmoth
"In addition to this, whenever you reboot the node after more than 24 hours of being synced, we back your wallet.dat up into the "backups" folder. This is useful if you ever accidentally delete your wallet.dat.
Also, if you want a paper backup, you can do a 'dumpprivkey accountaddress' command from the RPC." -Rob
"wallet is a collection of private keys"
"there are other ways to achieve high security. You can make a new wallet, encrypt it with a long password, send coins to it, put it on a flash drive and put it in cold storage, then download the hard drive cleaning program and erase the wallet.dat sectors from your PC. And of course, keep a printed copy of the private key on paper and put it in a safe. Put the usb in the safe also. Burn a cd rom with the wallet.dat file and put it in the safe." -Rob
How to safely back up your wallet https://dashpay.atlassian.net/wiki/spaces/DOC/pages/1867878/How+to+safely+back+up+your+wallet
Keep Your Crypto #SAFU (CZ's Tips) https://www.binance.com/en/blog/421499824684900429/Keep-Your-Crypto-SAFU-CZs-Tips
References: https://bitcointalk.org/index.php?topic=2042657.msg23955128#msg23955128 http://forum.biblepay.org/index.php?topic=27.0 https://bitcointalk.org/index.php?topic=2388064.msg27797529#msg27797529
To Read: https://en.bitcoin.it/wiki/Wallet https://en.bitcoin.it/wiki/Storing_bitcoins https://bitcoin.org/en/secure-your-wallet
NOTE: As of version 1.4.3.1 we have updated to HD wallets, so you should not need to worry about keypools anymore if you have upgraded
"Regarding the Sanctuary, you receive payments always to the same address (key), so the keypool is not consumed for those payments. But when you click to generate a new address on the "Receive" tab, one key will be deducted from the keypool. Also, sometimes new addresses are automatically generated and the keypool is consumed, for example when solo mining and finding a block, a new address could be used for the block reward.
You can always check your current keypool size by typing "getwalletinfo" in the RPC console and see "keypoolsize" and "keys_left". It's only concerning if they are a low number and you plan to generate new addresses in your wallet. They start from 1000. If the number gets too low, you can just type "keypoolrefill" to refill them back to 1000 and then you should backup the wallet. But from my experience the wallet automatically refills the keypool from time to time (or after certain actions like transactions), because I see that my wallet file keeps getting larger and the "keys_left" returns to 1000.
The only issue is if you actively use your wallet on multiple computers (for example cloud mining or simply sometimes using the wallet on your laptop), then one wallet could refill the keypool with new addresses and the other one will not, or they will generate different new addresses. If I understand this correctly, for example, you could receive a payment on a new address generated in one wallet; your old balance will be there on both wallets, but only the one wallet where you generated the new address would show the new payment. Then you should copy the wallet.dat file to other computers, to update them.
If you use the wallet on just one computer, you should just backup the wallet from time to time (or when you see it has increased in size). Qt also backups wallet.dat automatically, those can be found in the folder %AppData%\BiblepayCore\backups, you will see that they also have timestamps in their names and possibly different sizes." -inblue
https://bitcointalk.org/index.php?topic=2388064.msg27391534#msg27391534
submitted by togoshige to BiblePay [link] [comments]

How To Crack BitCoin 2019 Real Story Of Binance by Incrypted BITCOIN BLOCKCHAIN FREEBITCOIN 2020 ⭐️Blockchain Hack Doubler Bitcoin Doubler Software⭐️ What Is Bitcoin Core (BTCC) ? And Why Its Important BITCOIN Wallet Setup - How to enable secondary encryption. Setting up Bitcoin Wallet in

A Bitcoin wallet is as simple as a single pairing of a Bitcoin address with its corresponding Bitcoin private key. Such a wallet has been generated for you in your web browser and is displayed above. To safeguard this wallet you must print or otherwise record the Bitcoin address and private key. It is important to make a backup copy of the private key and store it in a safe location. Bitcoin Stock Dividends, France + Bitcoin, Countries Holding Bitcoin & IMF + Stablecoins November 18, 2019 Bitcoin Ethereum Litecoin Ripple Binance Technical Analysis Chart 6/28/2019 By ChartGuys.com Bitcoin core wallet RPC console commands – Bitcoin-qt client API call lists. October 21, 2020. Tutorial: How to setup, configure and use XMRig? CPU, AMD and NVIDIA miner. May 8, 2018 . How to connect MetaMask wallet to Binance smart chain (BSC) mainnet & testnet. September 16, 2020. BEP2, BEP20, ERC20, OMNI & TRC20 networks – What’s the difference? September 14, 2020. Transaction Hash ID ... Home / Guides / Wallet is encrypted and currently locked – Unlocking wallet the right way. Guides Wallet is encrypted and currently locked – Unlocking wallet the right way. coinguides Follow on Twitter April 19, 2018. 5 4,716 . Facebook Twitter LinkedIn Pinterest Reddit. We’ve covered so many wallet tutorials so far explaining how to use both electrum and QT wallets. Whenever we make a ... Common operations Listing my bitcoin addresses. Listing the bitcoin addresses in your wallet is easily done via listreceivedbyaddress.It normally lists only addresses which already have received transactions, however you can list all the addresses by setting the first argument to 0, and the second one to true. Binance; Cex; KuCoin; Changelly; The Best Ethereum Wallets Available 1. Ledger Nano X . This is the most modern ETH hardware wallet that you could get. Ledger has been a pioneer in the industry of hardware wallets and they support Ethereum all the tokens of Ethereum chain. Right now Ledger Ethereum integration is available via MyEtherwallet which makes it easier for you to manage your Ethereum ... Bitcoin-QT does not enable its RPC interface by default. To enable it: Close Bitcoin-QT and restart it with bitcoin-qt -server. Unlock your wallet. If you have an encrypted wallet (recommended), you need to unlock it temporarily before importing private keys. The RPC command for unlocking an encrypted wallet is walletpassphrase <passphrase> <timeout>. Typing this directly in a bash terminal ... Binance Smart Chain is an innovative solution to bring programmability and interoperability to Binance Chain. Binance Smart Chain relies on a system of 21 validators with Proof of Staked Authority (PoSA) consensus that can support short block time and lower fees. Cross-chain transfer and other communication are possible due to native support of interoperability. This dual-chain architecture ... #issues speaking with bitcoin rpc. #bitcoin watch. #bitcoin commerce . #earn bitcoins. #bitcoin server. #bitcoin cuda. #promote bitcoins. #bitcoin value. #eff bitcoin. #google bitcoin. #bitcoin debian. #bitcoin fountain. #slashdot bitcoin. #bitcoin. #purchase bitcoins. #purchase bitcoin. #bitcoin purchase. #bitcoin miner 2019. #bitcoin miner 2019 source. #bitcoin miner 2019 final – v5.1.1. # ... Bitcoin core wallet RPC console commands – Bitcoin-qt client API call lists. coinguides Follow on Twitter October 21, 2020. 0 42 . Facebook Twitter LinkedIn Pinterest Reddit. In this article we’ll share some of the basic commands that you can use to interact with your Bitcoin core RPC console. Bitcoin core QT client is the original Bitcoin wallet and a full node that has features most ...

[index] [5290] [9040] [5316] [20149] [11464] [9812] [18021] [19535] [17215] [6893]

How To Crack BitCoin 2019

In this video, I will share with you how to set up a bitcoin wallet using MultiBit as an example. Bitcoin Wallet: https://bitcoin.org/en/choose-your-wallet B... Bitcoin crack rich wallet generator Hacking Is Tether Responsible For Bitcoin' Breaking Bitcoin Market Update - Bitcoin Fakes Out Short Sellers - Strong Rebound As Alts Surge Binance СЕО LIVE: Bitcoin price prediction & Givе Awaу BTC Binance 3,674 watching Live now Hard Forks Killing Bitcoin, $100,000 TRON Bounty And Ethereum Passes Bitcoin - Duration: 28:07. bitcoin ipad bitcoin illegal i bitcoin i bitcoin in usd i bitcoin in inr i bitcoin in gbp bitcoin i sverige bitcoin i sek bitcoin i don't get it bitcoin i litecoin bitcoin i boden investera i bitcoins Cryptotab script, free bitcoins, how to earn free bitcoins, how to earn bitcoins, cryptotab hack, bitsler script, bitcoin generator, how to get bitcoins, bitcoin miner 2019, how to mine bitcoins ... Hi! We are Incrypted and here’s our version of the Binance’s Story. We tried to show the most important milestones of CZ and Binance starting from working in McDonald's and ending with a great ... You can use any bitcoin wallet to deposit and withdraw. You can double or triple one time per day. Min deposit is 0.01 BTC to double and 0.50 BTC to triple. Max deposit to triple is 0.80 BTC. You ...

#